Electroplating Tanks

For Electroplating tanks chemical storage and many electro-processes, it is necessary for such tanks/container which is suitable for use in the chemical solution. The following type of tanks is available to be employed according to suitability and operating conditions.

Welded steel tanks: These tanks are made of mild steel sheet, duly lined with PVC, rubber, glass fiber, and lead-lined from inside or both side.

Plastic tanks: Plastic tanks are widely used in electroplating industry because these are lightweight, chemical corrosion resistant and good electrical insulator. The following types of tanks are available

Polypropylene tanks: HDPE tank, PVC tanks, suitably reinforced with ms frame and lined with fiberglass. Especially pp and rigid PVC tanks are made of high-quality sheets using the latest extrusion welding technology form leisure(swiss)

Stainless steel: These tanks are made of stainless steel sheet. Many compositions of ss are available. It is necessary to use proper grade of material according to the employed solution and operating conditions.

Turbine blowers are designed to meet the requirement of most critical applications. it is widely demanded in electroplating, metal finishing plant, effluent treatment plant, vacuum lifting, wastewater treatment plant and other related areas. The blower is constructed as a unit for mechanical simplicity and maximum structural integrity. The elimination of clutches, gears, belts and sliding vanes reduced periodic maintenance requirements while increasing reliability. All blowers’ impellers are dynamically balanced to virtually eliminate vibration while increasing overall long-term reliability.

The Hull Cell Apparatus is a miniature plating unit designed to produce cathode deposits on a panel that correlates the characteristics of the plating unit being evaluated. Interpretation of the ‘‘as plated’’ cathode panel give rapid information about brightness levels, irregular plate deposits, uniformity of deposits,coverage, throwing power, impurities, and plating bath chemistry.

To speed up production in plating works, the need to dry arises, particularly small articles, after dipping or other wet operation. The Shell of the dryer is made of mild steel sheet and is cylindrical in shape. This is mounted on the heavy iron base to provide stability when the workload is out of balance.
The centrifugal dryer contains a perforated Stainless Steel basket which snuggly fits over an underlying rotating disc. The inner perforated Stainless Steel basket can be manually lifted out from the cylinder. The rotation disc gets the drive from an Electric motor and rotates when the power is switched ON; the perforated Stainless steel Basket placed on the disc also rotates with the disc and generate a centrifugal force which A coil-type heater is also fitted on the Lid of the dryer to keep the inside temperature to the desired level to dry the material .

 This dryer can be equipped with Mechanical Lid- Lock and brake system with starter and a separate switch for the Automatic on-off function of the dryer.

We offer Ampere minute | hour meter, a precision Electronic instrument with latest ic technology. This meter is used for electroplating thickness control and testing battery Amp-Hr. These meters are available with 6 RED 7 Segment LEDs of 0.56” character height. However, the current display is fixed at Max 9999 Amps using a shunt of current & 75mV for user programmed. Following are some of the features of our model 800AH programmable amp-hour meter:

Electroplating: Plating thickness is directly proportional to the integration of current over a period of time. The preset Amp-Hr or Amp-Min limit ensures precision repeatability and uniformity of the plating thickness guaranteeing quality and avoiding wastage of material. Time controlled dosing pumps allow automation. Hence where there is a criticality of the thickness of plating and uniformity is required, Ampere-Hour | Minute Meter is the solution. For example, gold plating, rhodium plating, platinum plating etc.

Battery Testing: The instrument integrates the current while allowing the charged battery to discharge through a load until the battery voltage falls below the specified limit (10.5V for a 12V battery), to give a measure of the AH rating of the battery.

Rectifiers are widely used in Electroplating, Anodizing, Etching, some cleaning process and other Electrochemical processes. Techno rectifiers are custom built as per requirement of different voltage(DC) ie. 8-12 volt for most of the electroplating, some cleaning processes, 16 volts for Sulfuric and Chromic Anodizing and some Electrochemical processes. These rectifiers are made in air-cooled and oil cooled. Generally, oil cooled type rectifier is recommended. However, if proper care is taken from the plating bath and its fumes,

A belt oil skimmer is a very simple product to remove the floating oil. We manufacture oil skimmer as per customer requirement. As this application depends upon the area, location and requirements given below, the oil skimmers are distributed in three types:

single belt type skimmer:- Uses endless polyurethane coated endless belt. This skimmer uses a single belt to collect the oil.
double belt skimmer:- This type of skimmer uses a double belt to collect the oil.
disk type skimmer:- This type of skimmer uses disk instead of the belt.

Description / Specification of Dosing Pump

We are involved in offering a wide range of Dosing Pump to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Dosing Pump. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design